More information is available at the Glenn Duker

Tematy nie związane z serialem, czyli można rozmawiać (prawie) o wszystkim :)

More information is available at the Glenn Duker

Postprzez misshuana » Śr wrz 13, 2017 3:17 am

With the development of tower buildings Jhoulys Chacin Jersey , the demand of elevators are in rising and

large-volume trend as they have to serve many people in short time. Tokyo Sky Tree is

the representative of these tower buildings, where set a 600mmin high speed and large

volume elevator as well as the 464.4m working elevator with longest lifting distance

in Japan, to the "Tembo Viewing Platform" and "Tembo Galleria", which are 350m and

450m respectively away from the ground. This article introduced the rolling bearings

that used in such elevators with high security and comfort.





1. <"http:www.bearingseat">bearing housing in elevators



The driving steel wire rope pulley of the winding machine loads the car weight, car

self weight, clump weight, wirerope self weight etc., thus it needs large load for the

tower and large volume. Therefore, winding machine should adopt bearings with features

of large loading capacity, long service life, excellent and high speed, low noise, and

low vibration. For such requirements,
href="http:www.bearingseatarticle_list_86">carrier roller with

automatic adjusting core that can balance the bending between the shaft and shell can

be used in winding machines as they have advantages of large loading capacity and easy

installation. Generally grease lubrication is performed to such bearings and under

spot check of the rules Jason Grilli Jersey , it should add the grease.





??


2. Special steel for bearings



Rolling bearing consists of rail wheel, rolling element and holder that can support

the rolling elements. Under high contact pressure, the former two parts will perform

rolling contact with the sliding. The holder is in free sliding contact with the other

one or two parts and bears the tensile strength and pressure force. Therefore,

materials of the three components need different performance.




??

3. Manufacturing technology of the bearings



The main factor that impacts the fatigue life of the rolling bearing from
href="http:www.bearingseatarticle_list_86">carrier roller

manufacturers is the non-metallic inclusion in steel, which is the impurity in

steel, and if it is under the bearing rail, there will be stress concentration to its

surroundings, then cause crack, extension and crush in the end. Especially for bad

influence of hard oxides to non-metallic inclusion, it is the effective way to reduce

the oxygen content in the steel. Those steel manufactuers have done this through

development of technologies such as dissolution, refining, VD and continuous casting

etc.




??
??
4. Long service life for bearings



Elevator bearings should have high reliability so as to avoid bearing crush. As

mentioned above, we know that such crush is affected by the non-metallic inclusion in

steel , thus the review and manufacture control are very important to the inclusions.

Nowadays Jamie Garcia Jersey , bearings are mainly made of high clean steel that can reduce the oxygen

content and inclusions. In addition, through eveluation technique for material

cleaniness such as the improvement of image analytic method, high reliable bearing

steel with large particle inclusions that can reduce the effect to the bearing life

has been developed.




??

5. Mute, low vibration, self aligning roller bearing for elevator ??
Representatives including Tokyo Sky Tree with high speed and large volume elevator

winding engine adopts self aligning roller bearing that can meet the requirements of

reducing the nose and vibration, whose special designs are:




1) Optimization of the space in the bearing



2) Improvement of the part precision




?
For elevator bearings with requirement of high reliability, it is very important to

select steel with high cleanliness and quality management. High speed elevators in

tower buildings day by day need attention of high security, high speed and low noise,

thus best materials for bearings are urgently expected to develop. Jan 2, 2013 : Bharat Book Bureau presents the new report, on ''Global Pure Play Software Testing Services Market 2014-2018" which includes a discussion of the key vendors operating in this market.

TechNavio's analysts forecast the Global Pure Play Software Testing Services market to grow at a CAGR of 16.91 percent over the period 2013-2018. One of the key factors contributing to this market growth is the reduced operational time and cost. The Global Pure Play Software Testing Services market has also been witnessing the shift in focus towards cloud-based testing. However, the creating and maintaining a staging environment could pose a challenge to the growth of this market.

The Global Pure Play Software Testing Services Market 2014-2018, has been prepared based on an in-depth market analysis with inputs from industry experts. . Wholesale NCAA Jerseys Wholesale NBA Jerseys Wholesale MLB Jerseys Wholesale NHL Jerseys Wholesale NFL Jerseys Wholesale Jerseys
misshuana
 
Posty: 276
Dołączył(a): Pt cze 09, 2017 1:56 am

Powrót do Off-topic

Kto przegląda forum

Użytkownicy przeglądający ten dział: Brak zidentyfikowanych użytkowników i 3 gości

cron